MCU 8Bit/16Bit ST9 CISC 128KB Flash 5V Automotive 100Pin PQFP Tray
The ST92124-Auto/150-Auto/250-Auto microcontroller is developed and manufactured by STMicroelectronics using a proprietary n-well HCMOS process. Its performance derives from the use of a flexible 256-register programming model for ultra-fast context switching and real-time event response. The intelligent on-chip peripherals offload the ST9 core from I/O and data management processing tasks allowing critical application tasks to get the maximum use of core resources. The new-generation ST9 MCU devices now also support low power consumption and low voltage operation for power-efficient and low-cost embedded systems.
**Key Features**
-
.
-
Memories
-
.
-
Internal memory: Single Voltage Flash up to 256 Kbytes, RAM up to 8 Kbytes, 1 Kbyte E3 TM Emulated EEPROM
-
.
-
In-Application Programming IAP
-
.
-
224 general purpose registers register file available as RAM, accumulators or index pointers
-
.
-
Clock, reset and supply management
-
.
-
Register-oriented 8/16 bit CORE with RUN, WFI, SLOW, HALT and STOP modes
-
.
-
0-24 MHz Operation Int. Clock, 4.5-5.5 V range
-
.
-
PLL Clock Generator 3-5 MHz crystal
-
.
-
Minimum instruction time: 83 ns 24 MHz int. clock
-
.
-
Up to 80 I/O pins
-
.
-
Interrupt management
-
.
-
4 external fast interrupts + 1 NMI
-
.
-
Up to 16 pins programmable as wake-up or additional external interrupt with multi-level interrupt handler
-
.
-
DMA controller for reduced processor overhead
-
.
-
Timers
-
.
-
16-bit Timer with 8-bit Prescaler, and Watchdog Timer activated by software or by hardware
-
.
-
16-bit Standard Timer that can be used to generate a time base independent of PLL Clock Generator
-
.
-
Two 16-bit independent Extended Function Timers EFTs with Prescaler, up to two Input Captures and up to two Output Compares
-
.
-
Two 16-bit Multifunction Timers, with Prescaler, up to two Input Captures and up to two Output Compares
-
.
-
Communication interfaces
-
.
-
Serial Peripheral Interface SPI with selectable Master/Slave mode
-
.
-
One Multiprotocol Serial Communications Interface with asynchronous and synchronous capabilities
-
.
-
One asynchronous Serial Communications Interface with 13-bit LIN Synch Break generation capability
-
.
-
J1850 Byte Level Protocol Decoder JBLPD
-
.
-
Up to two full I²C multiple Master/Slave Interfaces supporting Access Bus
-
.
-
Up to two CAN 2.0B Active interfaces
-
.
-
Analog peripheral low current coupling
-
.
-
10-bit A/D Converter with up to 16 robust input channels
-
.
-
Development tools
-
.
-
Free High performance development environment IDE based on Visual Debugger, Assembler, Linker, and C-Compiler; Real Time Operating System OSEK OS, CMX and CAN drivers
-
.
-
Hardware emulator and Flash programming board for development and ISP Flasher for production