TPS62054

采用 MSOP-10 封装的 1.8V 800mA 输出 10V 输入的 95% 效率步降转换器

The TPS6205x devices are a family of high-efficiency synchronous step-down DC-DC converters that are ideally suited for systems powered from a 1- or 2-cell Li-Ion battery or from a 3- to 5-cell NiCd, NiMH, or alkaline battery.

The TPS6205x devices are synchronous pulse width modulation PWM converters with integrated N- and P-channel power MOSFET switches. Synchronous rectification increases efficiency and reduces external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving pulse frequency modulation PFM mode at light load currents. Operating frequency is typically 850 kHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 600 kHz to 1.2 MHz. For low noise operation, the converter can be programmed into forced-fixed frequency in PWM mode. In shutdown mode, the current consumption is reduced to less than 2 µA. The TPS6205x devices are available in the 10-pin DGS micro-small outline package MSOP and operates over a free air temperature range of –40°C to 85°C.

.

High-Efficiency Synchronous Step-Down

Converter With up to 95% Efficiency

.

12-µA Quiescent Current Typical

.

2.7-V to 10-V Operating Input Voltage Range

.

Adjustable Output Voltage Range: 0.7 V to 6 V

.

Fixed Output Voltage Options Available With

1.5 V, 1.8 V, and 3.3 V

.

Synchronizable to External Clock: Up to 1.2 MHz

.

High-Efficiency Over a Wide Load Current Range

in Power-Save Mode

.

100% Maximum Duty Cycle for Lowest Dropout

.

Low-Noise Operation in Forced Fixed-

Frequency PWM Operation Mode

.

Internal Softstart

.

Overtemperature and Overcurrent Protected

.

Available in 10-Pin Micro-Small Outline

Package MSOP