具有三态输出的八路收发器和线路/MOS 驱动器 20-SSOP -40 to 85
These octal transceivers and line drivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control DIR input. The output-enable OE\\\\ input can be used to disable the device so the buses are effectively isolated.
The B-port outputs, which are designed to sink up to 12 mA, include equivalent 25- series resistors to reduce overshoot and undershoot.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.
The SN54ABT2245 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT2245 is characterized for operation from -40°C to 85°C.
型号 | 品牌 | 下载 |
---|---|---|
SN74ABT2245DBR | TI 德州仪器 | 下载 |
SN74CB3T3383DW | TI 德州仪器 | 下载 |
SN74CBT16212ADLRG4 | TI 德州仪器 | 下载 |
SN74CB3T3383DWR | TI 德州仪器 | 下载 |
SN74CBTLV3383PW | TI 德州仪器 | 下载 |
SN74CBT16212AZQLR | TI 德州仪器 | 下载 |
SN74CBT3383DBQR | TI 德州仪器 | 下载 |
SN74CB3T3383PW | TI 德州仪器 | 下载 |
SN74CBTLV3383PWE4 | TI 德州仪器 | 下载 |
SN74CBT3383DBR | TI 德州仪器 | 下载 |
SN74CB3T3383PWR | TI 德州仪器 | 下载 |