8 通道数字音频 PWM 处理器
The is an 8-channel digital pulse-width modulator PWM that provides both advanced performance and a high level of system integration. The TAS5508B is designed to interface seamlessly with most audio digital signal processors. The TAS5508B automatically adjusts control configurations in response to clock and data rate changes and idle conditions. This enables the TAS5508B to provide an easy-to-use control interface with relaxed timing requirements.
The TAS5508B can drive eight channels of H-bridge power stages. Texas Instruments power stage parts TAS5111, TAS5112, or TAS5182 with FETs are designed to work seamlessly with the TAS5508B. The TAS5508B supports either the single-ended or bridge-tied-load configuration. The TAS5508B also provides a high-performance, differential output to drive an external, differential-input, analog headphone amplifier such as the TPA112.
The TAS5508B uses AD modulation operating at a 384-kHz switching rate for 48-, 96-, and
192-kHz data. The 8× oversampling combined with the fifth-order noise shaper provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
The TAS5508B is a clocked slave-only device. The TAS5508B receives MCLK, SCLK, and LRCLK from other system components. The TAS5508B accepts master clock rates of 128, 192, 256, 384, 512, and 768 fS. The TAS5508B accepts a 64-fS bit clock.
The TAS5508B allows for extending the dynamic range by providing a power-supply, volume-control PSVC output signal.
Control Interface
Data-Sample-Rate Detection
Six Channels With Stereo Lineout or Eight Channels
Differential-Input Operational Amplifier
Differential Amplifier Like the TPA112
Bridge-Tied Loads
192-kHz Sampling Rates
I2S, or Right-Justified Input Data
Clock Rates Up to a Maximum of 50 MHz
of Precision for Most Audio-Processing Features
to 109 dB
Ranges of 18 dB to 109 dB
Selectable Corner Frequencies, and Second-Order Slopes
Two Offsets, and Three Slopes
Channel Input Can Be Any Ratio of the Eight Input Channels.
Mix of Any Two Signal-Processed Channels. It is Recommended
to Use the Pass-Through Output Mixer Configuration.
Mix of Any Three Signal-Processed Channels. It Is Recommended
to Use the Pass-Through Output Mixer Configuration.
Selected Manually or Automatically Based on Specific
Data Rates.
of Precision
32 kHz48 kHz, 4× Oversampling at 88.2 kHz and
96 kHz, and 2× Oversampling at 176.4 kHz and 192 kHz
96-, 176.4-, and 192-kHz Data Rates
and Duration for Noise-Free Operation
Clear AM Reception
Dynamic Range in High-Performance Applications
Matlab is a trademark of Math Works, Inc.
型号 | 品牌 | 下载 |
---|---|---|
TAS5508B | TI 德州仪器 | 下载 |
TAS5611PHD2EVM | TI 德州仪器 | 下载 |
TAS5612APHDR | TI 德州仪器 | 下载 |
TAS5612LADDV | TI 德州仪器 | 下载 |
TAS5613PHD2EVM | TI 德州仪器 | 下载 |
TAS5548EVM | TI 德州仪器 | 下载 |
TAS5707EVM | TI 德州仪器 | 下载 |
TAS5622ADDV | TI 德州仪器 | 下载 |
TAS5611APHDR | TI 德州仪器 | 下载 |
TAS5707PHP | TI 德州仪器 | 下载 |
TAS5711PHPEVM | TI 德州仪器 | 下载 |