B10B-PHDSSLFSN

JST PHD 系列 2.0mm 有罩印刷电路板管座连接器PHD 系列 2.0 mm 线对板印刷电路板安装管座连接器，具有双排触点配置和完整的罩，可防止错误配接、消除助焊剂和防止其他污染物进入。 这些 PHD 2.00 mm 印刷电路板管座具有紧凑型、薄型设计，高度仅为 8.8 mm（配接后），可使其满足高密度和薄型连接的要求。### 2.0mm 线到板 JST - PHD 系列PHD 系列是 2.0mm .079" 节距、压接类型、双排、线对板连接器。 设计用于满足高密度、薄型连接的要求。

PHD 系列 2.0mm 有罩印刷电路板管座

PHD 系列 2.0 mm 线对板印刷电路板安装管座连接器，具有双排触点配置和完整的罩，可防止错误配接、消除助焊剂和防止其他污染物进入。 这些 PHD 2.00 mm 印刷电路板管座具有紧凑型、薄型设计，高度仅为 8.8 mm（配接后），可使其满足高密度和薄型连接的要求。

得捷:
CONN HEADER VERT 10POS 2MM

立创商城:
PHD 2mm 2x5P 直插

欧时:
B10B-PHDSS LFSN - JST PCB 针座 PHD 系列 10路 2mm节距 2排 直向, 焊接端接, 3A, 通孔

艾睿:
Support physical configuration options for jumper posts by mounting this shrouded B10B-PHDSS LFSN header connector from JST Corporation. This HDR connector&s;s 10 contacts that are made out of copper alloy and plated with tin over copper. This is a 2-row connector. It has a maximum voltage rating of 250 VDC|250VAC. Its pitch is 2 mm. It has a header type gender. It has a straight body orientation. This device has a maximum current rating of 3 A. This product is 11.9 mm long, 6.5 mm tall and 5 mm deep. B10B-PHDSS LFSN is housed in ivory polyamide 6/6. It uses the solder termination method. This connector has an operating temperature of -25 to 85 °C.

Chip1Stop:
Conn Shrouded Header HDR 10 POS 2mm Solder ST Thru-Hole Box

Verical:
Conn Shrouded Header 4 Sides HDR 10 POS 2mm Solder ST Top Entry Thru-Hole Box

CDI:
ShroudedHeader, Top Entry, 10Circuit, 2.5mmPitch