GLD150-15

AC-DC Power Supply Single-OUT 15V 10A 150W Medical 21Pin

Single Output Power Supplies, 85 to 264 VAC Input Voltage, 115 W Power Rating

** Specifications** ** Input Current:** 2.8 A line current maximum, at 90 VAC, 60 Hz with full rated load, power factor 0.99 typical, 0.96 minimum. Input current harmonic content meets the requirements of IEC1000-3-2. ** Hold-Up Time:** Outputs will remain within regulation limits for 25 ms minimum from loss of AC input at full load, 10 ms before power fail indication. ** Output Noise:** 0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with noise probe directly across output terminals of the power supply. ** Inrush Current:** Inrush 240 VAC is less than 37 A, averaged over the first AC half-cycle under cold start conditions. Limiting provided by internal thermistors. ** Specifications Continued** ** Overvoltage Protection:** Built-in on all models. ** EMI/EMC Compliance:** All models including built-in EMI filtering to meet the EMC requirements of IED601-1-2. Unless otherwise stated, all tests are done at full load and 115 and 230 VAC input. Conducted Emissions — EN55011, Class B; FCC Class B Static Discharge — EN61000-4-2, Level 3 RF Field Susceptibility — EN61000-4-3, Level 3 Fast Transients/Bursts — EN61000-4-4, Level 3 Surge Susceptibility — EN61000-4-5, Level 3 Conducted RF Susceptibility — EN61000-4-6 Voltage Sags and Surges — EN61000-4-115%

** Features**

* Compact Size: 4.5 × 7 × 1.7

* Power Factor Corrected to IEC 1000-3-2 Class A

* Less Than 300 μA Leakage

* EMI Compliance to CISPR11, FCC Class B

* Power Fail and Remote Sense Standard

* Approved to UL2601, IEC601-1 and CSA 22.2 No. 601.1-M90 and 60601: 1990

* Two-Year Warranty

* CE Marked to LVD

* Optional Cover Available, Please Call Your Local Allied Sales Representative for Pricing