BQ24100

采用 QFN 封装具有 2A FET 的 bqSWITCHERTM 同步开关模式锂离子充电器，为 1 节独立版本

The bqSWITCHER™ series are highly integrated Li-ion and Li-polymer switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER™ series offers integrated synchronous PWM controller and power FETs, high-accuracy current and voltage regulation, charge preconditioning, charge status, and charge termination, in a small, thermally enhanced VQFN package. The system-controlled version provides additional inputs for full charge management under system control.

The bqSWITCHER™ charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on user- selectable minimum current level. A programmable charge timer provides a safety backup for charge termination. The bqSWITCHER™ automatically restarts the charge cycle if the battery voltage falls below an internal threshold. The bqSWITCHER™ automatically enters sleep mode when VCC supply is removed.

.

Ideal For Highly Efficient Charger Designs For

Single-, Two-, or Three-Cell Li-Ion and Li-Polymer

Battery Packs

.

bq24105 Also for LiFePO4 Battery see _Using

bq24105 to Charge the LiFePO4 Battery_

.

Integrated Synchronous Fixed-Frequency PWM

Controller Operating at 1.1 MHz With 0% to 100%

Duty Cycle

.

Integrated Power FETs for Up To 2-A Charge

Rate

.

High-Accuracy Voltage and Current Regulation

.

Available in Both Stand-Alone Built-In Charge

Management and Control and System-Controlled

Under System Command Versions

.

Status Outputs for LED or Host Processor

Interface Indicates Charge-In-Progress, Charge

Completion, Fault, and AC-Adapter Present

Conditions

.

20-V Maximum Voltage Rating on IN and OUT

Pins

.

High-Side Battery Current Sensing

.

Battery Temperature Monitoring

.

Automatic Sleep Mode for Low Power

Consumption

.

System-Controlled Version Can Be Used in NiMH

and NiCd Applications

.

Reverse Leakage Protection Prevents Battery

Drainage

.

Thermal Shutdown and Protection

.

Built-In Battery Detection

.

Available in 20-Pin, 3.50 mm × 4.50 mm VQFN

Package

.

APPLICA ONS

.

Handheld Products

.

Portable Media Players

.

Industrial and Medical Equipment

.

Portable Equipment

All other trademarks are the property of their respective owners