65239-004LF

Dubox 外壳适合与 Dubox 插座压接到线触点一起使用。Dubox 外壳可端对端堆叠，允许拆除触点，便于维修。 与 Dubox 有罩管座配接时，Dubox 外壳设计提供无源闭锁，带抗反向和防误匹配功能。### 注有关 Dubox 插座压接触点，请参见库存号 673-7685。### 2.54 mm FCI Dubox 插座Dubox 板到板系统的插座触点具有预受应力双臂设计，带 4 个壁，可提供低插入力和信号保护。 4 壁式触点设计，用于信号保护 触点采用双臂设计，可以减小插入力 易燃性等级 UL 94V-0

The DUBOX 65239 series Connector families offer an extensive range of through-hole and surface-mount part options, including either straight or right angle orientation from 2 to 50 positions, with a current rating of 3A maximum per individual contact. The Dubox® contact has a pre-stressed, dual beam design to enable low insertion force, 4-wall contact design for signal protection. These are applicable in electronic equipment or devices requiring a parallel, planar or perpendicular board-to-board, wire to-board or flat cable interconnects. Uses span industry segments.

.

Dual beam contact design

.

Contact pre-stressed

.

Mates with very short pins 5mm stackable end-to-end and side-by-side

.

Floating solder tails self centre on the circuit pads

.

4 wall contact design

.

Duplex plating

.

High reliable electrical performances

.

Low insertion force required

.

Meets your specific needs and is useful for Mezzanine Application

.

Easy to assures the coplanarity

.

Signal protection

.

Maintaining the alignment for soldering and facilitates robotic placement

.

Compatible with infrared and vaporphase reflow