开发板, LPCXpresso 54018, LPC54018 MCU, 集成触摸屏
LPCXpresso54018 development board comprised of target LPC54018 device with an on-board, CMSIS-DAP / SEGGER® J-Link compatible debug probe. The on-board probe is compatible with MCUXpresso IDE and other leading toolchains such as those from Keil™ and IAR®. The board is also equipped with a standard 10 pin header enabling the use of 3rd party debug probes and it also includes a complete set of peripheral interfaces to enable developers to fully explore the capabilities of LPC540xx devices. This LPCXpresso54018 development board is pre-loaded with demonstration program showing emWIN example.
-
.
-
UART and SPI port bridging from LPC54018 target to USB via the on-board debug probe
-
.
-
Support for external debug probe
-
.
-
3 x user LEDs, plus reset, ISP 3 and user buttons
-
.
-
Multiple expansion options including Arduino™ UNO and PMod
-
.
-
Built-in power consumption measurement for target LPC54018 MCU
-
.
-
Winbond 128Mb W25Q128JVFIM Quad-SPI flash
-
.
-
Winbond 128Mb W9812G6JB-6I SDRAM
-
.
-
Knowles SPH0641LM4H digital microphone, full size SD/MMC card slot and MMA8652FCR1 accelerometer
-
.
-
Stereo audio codec with line in/out and 10/100Mbps Ethernet RJ45 connector
-
.
-
High and full speed USB ports with micro A/B connector for host or device functionality