TMS320DM642AGNZ7

视频/影像定点数字信号处理器 Video/Imaging Fixed-Point Digital Signal Processor

The TMS320C64x™ DSPs including the TMS320DM642 device are the highest-performance fixed-point DSP generation in the TMS320C6000™ DSP platform. The TMS320DM642 DM642 device is based on the second-generation high-performance, advanced Veloci™ very-long-instruction-word VLIW architecture VelociTI.2™ developed by Texas Instruments TI, making these DSPs an excellent choice for digital media applications. The C64x™ is a code-compatible member of the C6000™ DSP platform.

With performance of up to 5760 million instructions per second MIPS at a clock rate of 720 MHz, the DM642 device offers cost-effective solutions to high-performance DSP programming challenges. The DM642 DSP possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. The C64x™ DSP core processor has 64 general-purpose registers of 32-bit word length and eight highly independent functional units-two multipliers for a 32-bit result and six arithmetic logic units ALUs- with VelociTI.2™ extensions. The VelociTI.2™ extensions in the eight functional units include new instructions to accelerate the performance in video and imaging applications and extend the parallelism of the VelociTI™ architecture. The DM642 can produce four 16-bit multiply-accumulates MACs per cycle for a total of 2880 million MACs per second MMACS, or eight 8-bit MACs per cycle for a total of 5760 MMACS. The DM642 DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals similar to the other C6000™ DSP platform devices.

The DM642 uses a two-level cache-based architecture and has a powerful and diverse set of peripherals. The Level 1 program cache L1P is a 128-Kbit direct mapped cache and the Level 1 data cache L1D is a 128-Kbit 2-way set-associative cache. The Level 2 memory/cache L2 consists of an 2-Mbit memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. The peripheral set includes: three configurable video ports; a 10/100 Mb/s Ethernet MAC EMAC; a management data input/output MDIO module; a VCXO interpolated control port VIC; one multichannel buffered audio serial port McASP0; an inter-integrated circuit I2C Bus module; two multichannel buffered serial ports McBSPs; three 32-bit general-purpose timers; a user-configurable 16-bit or 32-bit host-port interface HPI16/HPI32; a peripheral component interconnect PCI; a 16-pin general-purpose input/output port GP0 with programmable interrupt/event generation modes; and a 64-bit glueless external memory interface EMIFA, which is capable of interfacing to synchronous and asynchronous memories and peripherals.

The DM642 device has three configurable video port peripherals VP0, VP1, and VP2. These video port peripherals provide a glueless interface to common video decoder and encoder devices. The DM642 video port peripherals support multiple resolutions and video standards e. g., CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M.

These three video port peripherals are configurable and can support either video capture and/or video display modes. Each video port consists of two channels - A and B with a 5120-byte capture/display buffer that is splittable between the two channels.

For more details on the Video Port peripherals, see the _TMS320C64x Video Port/VXCO Interpolated Control VIC Port Reference Guide_ literature number SPRU629.

The McASP0 port supports one transmit and one receive clock zone, with eight serial data pins which can be individually allocated to any of the two zones. The serial port supports time-division multiplexing on each pin from 2 to 32 time slots. The DM642 has sufficient bandwidth to support all 8 serial data pins transmitting a 192-kHz stereo signal. Serial data in each zone may be transmitted and received on multiple serial data pins simultaneously and formatted in a multitude of variations on the Philips Inter-IC Sound I2S format.

In addition, the McASP0 transmitter may be programmed to output multiple S/PDIF, IEC60958, AES-3, CP-430 encoded data channels simultaneously, with a single RAM containing the full implementation of user data and channel status fields.

McASP0 also provides extensive error-checking and recovery features, such as the bad clock detection circuit for each high-frequency master clock which verifies that the master clock is within a programmed frequency range.

The VXCO interpolated control port VIC provides digital-to-analog conversion with resolution from 9-bits to up to 16-bits. The output of the VIC is a single bit interpolated D/A output. For more details on the VIC port, see the _TMS320C64x Video Port/VXCO Interpolated Control VIC Port Reference Guide_ literature number SPRU629.

The ethernet media access controller EMAC provides an efficient interface between the DM642 DSP core processor and the network. The DM642 EMAC support both 10Base-T and 100Base-TX, or 10 Mbits/second Mbps and 100 Mbps in either half- or full-duplex, with hardware flow control and quality of service QOS support. The DM642 EMAC makes use of a custom interface to the DSP core that allows efficient data transmission and reception. For more details on the EMAC, see the _TMS320C6000 DSP Ethernet Media Access Controller EMAC / Management Data Input/Output MDIO Module Reference Guide_ literature number SPRU628.

The management data input/output MDIO module continuously polls all 32 MDIO addresses in order to enumerate all PHY devices in the system. Once a PHY candidate has been selected by the DSP, the MDIO module transparently monitors its link state by reading the PHY status register. Link change events are stored in the MDIO module and can optionally interrupt the DSP, allowing the DSP to poll the link status of the device without continuously performing costly MDIO accesses. For more details on the MDIO, see the _TMS320C6000 DSP Ethernet Media Access Controller EMAC / Management Data Input/Output MDIO Module Reference Guide_ literature number SPRU628.

The I2C0 port on the TMS320DM642 allows the DSP to easily control peripheral devices, boot from a serial EEPROM, and communicate with a host processor. In addition, the standard multichannel buffered serial port McBSP may be used to communicate with serial peripheral interface SPI mode peripheral devices.