210 系列 表面贴装 4 位置 3.5 mm 间距 接线端子
The 210-A-126-SMD represents a space saving and compact terminal block with a high connecting capacity. The distinguishing characteristic of the block is the significant increase of retention force on the PCB surface. Floating Retention Devices Floating Anchors on either side of the molding can move vertically before assembling and therefore ensure total coplanarity. By installing these anchors slightly toward the front of the connector the retention area of the entire terminal block is increased which improves the retaining strength of the installation and its resistance against the installer "wire pull-out" test. Subsequently the effects of the installer "wire pull-out test" force acting on the solder pins is highly reduced. Equipped with high temperature resistant pick disc and packed in tape and reel this genuine SMT connector is suitable for automatic assembling with Pick Place robots.
Low profile
Wire entrance parallel to PC Board
Elevator-style clamping mechanism with floating anchors
Typical peel off forces: 32 kg per 6 pole connector depending on soldering process