T89C51RD2-SMSIM

IC MCU 8Bit 64KB FLASH 68PLCC

Description

T89C51RD2 is high performance CMOS Flash version of the 80C51 CMOS single chip 8-bit microcontroller. It contains a 64 Kbytes Flash memory block for program and for data.

The 64 Kbytes Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin.

The T89C51RD2 retains all features of the 80C52 with 256 bytes of internal RAM, a 7-source 4-level interrupt controller and three timer/counters.

Features

• 80C52 Compatible

– 8051 Pin and Instruction Compatible

– Four 8-bit I/O Ports or 6 in 64/68 Pins Packages

– Three 16-bit Timer/Counters

– 256 bytes Scratch Pad RAM

– 7 Interrupt Sources With 4 Priority Levels

• ISP In-System Programming Using Standard VCC Power Supply

• Boot Flash Contains Low Level Flash Programming Routines and a Default Serial Loader

• High-Speed Architecture

–40 MHz in Standard Mode

–20 MHz in X2 Mode 6 Clocks/Machine Cycle

• 64K bytes On-chip Flash Program/Data Memory

–Byte and Page 128 bytes Erase and Write

–100K Write Cycles

• On-chip 1024 Bytes Expanded RAM XRAM

–Software Selectable Size 0, 256, 512, 768, 1024 bytes

–768 Bytes Selected at Reset for T87C51RD2 Compatibility

• Dual Data Pointer Variable Length MOVX for Slow RAM/Peripherals

• Improved X2 Mode with Independant Selection for CPU and Each Peripheral

• 2K bytes EEPROM Block for Data Storage

–100K Write Cycle

• Programmable Counter Array with

–High Speed Output

–Compare/Capture

–Pulse Width Modulator

  Watchdog Timer Capabilities

  Asynchronous Port Reset

  Full-duplex Enhanced UART

  Low EMI Inhibit ALE

–Hardware Watchdog Timer One-time Enabled with Reset-out

• Power Control Modes:

–Idle Mode

–Power-down Mode

• Power Supply:

–M version: Commercial and Industrial

  4.5V to 5.5V: 40 MHz X1 Mode, 20 MHz X2 Mode

  3V to 5.5V: 33 MHz X1 Mode, 16 MHz X2 Mode

–L version: Commercial and industrial

  2.7V to 3.6V: 25 MHz X1 Mode, 12 MHz X2 Mode

• Temperature Ranges: Commercial 0 to +70°C and Industrial -40 to +85°C

• Packages: PDIL40, PLCC44, VQFP44, PLCC68, VQFP64