MAX31850TATB+

MAXIM INTEGRATED PRODUCTS  MAX31850TATB+  温度传感器芯片, 数字式, ± 4°C, -270 °C, 400 °C, TDFN, 10 引脚

The is a cold-junction compensated, 1-wire thermocouple to digital converter in 10 pin TDFN package. This sophisticated thermocouple to digital converter includes a built-in 14bit analogue to digital converter ADC, cold-junction compensation sensing and correction, a digital controller, a 1-wire data interface and associated control logic. The 1-wire bus by definition requires only one data line and ground connection for communication with a central microcontroller. The data line requires a weak pull-up resistor since device is linked to the bus through a three-state or open-drain port. Four location address inputs simplify mapping of device to specific locations. This device has a unique 64bit serial code which allows multiple units to function on the same 1-wire bus. Hence it is simple to use one microcontroller the master device to monitor temperature from many thermocouples distributed over a large area.

.

Supply voltage range is 3V to 3.7V

.

"T" type thermocouple

.

Integration reduces design time and lowers system cost

.

14bit, 0.25°C resolution

.

Measured temperature range from -270°C to +400°C

.

Accuracy range of ±2°C

.

Detects thermocouple shorts to GND or VDD

.

Detects open thermocouple

.

1-wire multiddrop capability simplifies multisensor systems