OP37

低噪声，精密，高速运算放大器 Low Noise, Precision, High Speed Operational Amplifier

Product Details

The provides the same high performance as the OP27, but the design is optimized for circuits with gains greater than five. This design change increases slew rate to 17V/µsec and gain-bandwidth product to 63MHz.

The OP37 provides the low offset and drift of the OP07 plus higher speed and lower noise. Offsets down to 25µV and drift of 0.6µV/°C maximum make the OP-37 ideal for precision instrumentation applications. Exceptionally low noise en=3.5nV/Hz at 10Hz, a low 1/f noise corner frequency of 2.7Hz, and the high gain of 1.8 million, allow accurate high-gain amplification of low-level signals.

The low input bias current of ±10nA and offset current of 7nA are achieved by using a bias-current-cancellation circuit. Over the military temperature range this typically holds IB and IOS to ±20nA and 15nA respectively.

The output stage has good load driving capability. A guaranteed swing of ±10V into 600 Ohm and low output distortion make the OP37 an excellent choice for professional audio applications.

### Features and Benefits

.

Low Noise, 80 nV p-p 0.1 Hz to 10 Hz

3 nV/vHz @ 1 kHz

.

Low Drift, 0.2 µV/°C

.

High Speed, 17 V/µs Slew Rate

63 MHz Gain Bandwidth

.

Low Input Offset Voltage, 10 µV

.

Excellent CMRR, 126 dB

Common-Voltage @ 11 V

.

High Open-Loop Gain, 1.8 Million

.

Replaces 725, OP-07,

SE5534 In Gains > 5

.

Available in Die Form