BM63364S-VC

ROHM  BM63364S-VC  智能功率模块 IPM, IGBT, 600 V, 15 A, 1.5 kV, SDIP, DIPIPM 新

The is a 600V IGBT intelligent power module IPM for low speed switching drive in HSDIP25VC package. This intelligent power module is composed of gate drivers, bootstrap diodes, IGBTs and fly wheel diodes. Low saturation voltage IGBTs optimized for low speed switching drive to 6KHz such as a compressor is adopted. The module features high side IGBT gate driver SOI Silicon On Insulator process, drive circuit, high voltage level shifting, current limit for bootstrap diode, control supply under voltage locked out UVLO and low side IGBT gate driver drive circuit, short circuit current protection SCP, control supply under voltage locked out UVLO, thermal shutdown TSD. It is typically used in low speed switching drive of AC100 to 240Vrms DC voltage less than 400V class motor, low speed switching drive of compressor motor for air conditioner, washing machine, refrigerator. The BM63363S-VC has dimension of 38.0mm x 24.0mm x 3.5mm.

.

600V/15A, 3 phase DC/AC inverter for motor control

.

Control power supply from 13.5V to 16.5V and floating control power supply from 13V to 18.5V

.

Low side IGBT open emitter

.

Fault signal LVIC corresponding to SCP low side IGBT, TSD, UVLO fault

.

Input interface 3.3V, 5V line

.

Isolation voltage of 1500Vrms and self protection supply voltage of 400V

.

IGBT collector emitter voltage of 1.5V, forward voltage of 1.5V & fault output current of 1mA

.

FWD reverse recovery time of 100ns and high side IGBT turn on delay time of 0.9µs

.

Module case temperature from -25°C to +100°C

.

Collector emitter cut-off current of 100µA, supply voltage from 0V to 400V

ESD sensitive device, take proper precaution while handling the device.

The residue of flux may negatively affect product performance and reliability when highly active halogenous chlorine, bromine flux is used.