MCP1640 DC-DC Boost Converter Ref DesignThe MCP1640 12V/50mA Two Cells Input Boost Converter Reference Design is designed to demonstrate the MCP1640 devices high-voltage boost capability above its typical output range of 5.5V. This board boosts the low-voltage input to 12V and up to 70mA load. By changing specific resistors, a lower/higher output than 12V can be obtained. The MCP1640 Input Boost Converter was developed to help engineers reduce product design cycle time. At 2.0V input and 12V output the board is capable of a maximum of 50mA load current.Input voltage: Two Alkaline or Lithium Cells, 2.0-3.0V typical Supports extended input range of 2.0-5.0V Output: 12V/50mA typical @ 2.0V input Output: 12V/70mA @ 3.3V input No-load input current: 0.2 mA @ 3.0V input Efficiency: Up to 75% PWM operation at 500kHz ### 开关电压调节器，Microchip
MCP1640 series DC/DC，步升 1，非隔离 输出评估板
得捷:
BOARD MCP1640 2CELL BOOST CONV
欧时:
Microchip ARD00386 开发套件
立创商城:
ARD00386
贸泽:
电源管理IC开发工具 MCP1640 12V 50mA Boost Converter
艾睿:
MCP1640 12V/50MA TWO CELLS INPUT BOOST CONVERTER
Allied Electronics:
MCP1640 DC-DC Boost Converter Ref Design
安富利:
MCP1640 12V/50mA Two Cells Input Boost Converter Reference Design
Newark:
# MICROCHIP ARD00386 Evaluation Board, 50mA Boost Converter Reference Design, Two Alkaline or Lithium Cells
Online Components:
MCP1640 DC to DC Converter and Switching Regulator Chip 12VDC Output Reference Design Board