PCA9555PW,118

NXP  PCA9555PW,118  芯片, 输入/输出扩展器, 16位, 400KHZ, TSSOP24, 整卷

The is a 16-bit parallel Input/output GPIO Expander for I²C-bus/SMBus applications and was developed to enhance the Semiconductors family of I²C-bus I/O expander. The improvements include higher drive capability, 5V I/O tolerance, lower supply current, individual I/O configuration and smaller packaging. The I/O expander provides a simple solution when additional I/O is needed for ACPI power switches, sensors, push buttons, LEDs, fans, etc. It consists of two 8-bit configuration input or output selection; input, output and polarity inversion active HIGH or active LOW operation registers. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each Input or Output is kept in the corresponding Input or Output register. The polarity of the read register can be inverted with the polarity inversion register. All registers can be read by the system master.

.

Polarity inversion register

.

Active low interrupt output

.

Low standby current consumption

.

Noise filter on SCL/SDA input

.

No glitch on power-up

.

Internal power-ON reset

.

Latch-up testing is done to JEDEC standard JESD78 which exceeds 100mA