ADE7769AR

电能计量IC，集成振荡器和无负载指示 Energy Metering IC with Integrated Oscillator and No-Load Indication

GENERAL DESCRIPTION

The ADE7769 is a high accuracy electrical energy metering IC. It is a pin reduction version of the ADE7755 with an enhanced, precise oscillator circuit that serves as a clock source to the chip. The ADE7769 eliminates the cost of an external crystal or resonator, thus reducing the overall cost of a meter built with this IC. The chip directly interfaces with the shunt resistor.

FEATURES

On-chip oscillator as clock source

High accuracy, supports 50 Hz/60 Hz IEC62053-21

Less than 0.1% error over a dynamic range of 500 to 1

Supplies average real power on frequency outputs F1 and F2

High frequency output CF calibrates and supplies instantaneous real power

CF output remains logic high when ADE7769 is under no-load threshold

Logic output REVP indicates a potential miswiring or negative power

Direct drive for electromechanical counters and 2-phase stepper motors F1 and F2

Proprietary ADCs and DSPs provide high accuracy over large variations in environmental conditions and time

On-chip power supply monitoring

On-chip creep protection no-load threshold

On-chip reference 2.45 V 20 ppm/°C typical with external overdrive capability

Single 5 V supply, low power 20 mW typical

Low cost CMOS process