ISO7420FCCDR

低功耗双通道数字隔离器 Low-Power Dual Channel Digital Isolator

Description

ISO7420FCC provides galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. This device has two isolated channels. Each channel has a logic input and output buffer separated by a silicon dioxide SiO2 insulation barrier. Used in conjunction with isolated power supplies, this device prevents noise currents on a data bus or other circuit from entering the local ground and interfering with or damaging sensitive circuitry. The suffix F indicates low-output option in fail-safe conditions see Table 2. This device has integrated noise filter for harsh environments where short noise pulses may be present at the device input pins.

Features

• Signaling Rate: 50 Mbps 5-V Supplies

• Output is Low in Default Mode

• Integrated Noise Filter on the Input Pins

• Low Power Consumption: Typical ICC per Channel

   – 1.8 mA at 1 Mbps, 3.9 mA at 25 Mbps 5-V Supplies

   – 1.4 mA at 1 Mbps, 2.6 mA at 25 Mbps 3.3-V Supplies

• Low Propagation Delay: 20 ns Typical 5-V Supplies

• Channel-to-Channel Output Skew: 2 ns Maximum

• 3.3-V and 5-V Level Translation

• Wide TA Range Specified: –40°C to 125°C

• 60-KV/μs Transient Immunity, Typical 5-V Supplies

• Low Emissions

• Isolation Barrier Life: > 25 Years

• Operates from 2.7-V to 5.5-V Supply Levels

• Narrow Body SOIC-8 Package

• Safety and Regulatory Approvals

   – 4242 VPK Isolation per DIN V VDE V 0884-10 VDE V 0884-10:2006-12

   – 2.5 KVRMS Isolation for 1 Minute per UL 1577

   – CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards

   – GB4943.1-2011 CQC Certification

  

Applications

• Opto-Coupler Replacement in:

   – Industrial FieldBus

      – ProfiBus

      – ModBus

      – DeviceNet™ Data Buses

   – Servo Control Interface

   – Motor Control

   – Power Supplies

   – Battery Packs