ISPLSI5256VA-125LB272

IC CPLD 256MC 7.5NS 272BGA

ispLSI 5000V Description

The ispLSI 5000V Family of In-System Programmable High Density Logic Devices is based on Generic Logic Blocks GLBs of 32 registered macrocells and a single Global Routing Pool GRP structure interconnecting the GLBs.

Outputs from the GLBs drive the Global Routing Pool GRP between the GLBs. Switching resources are provided to allow signals in the Global Routing Pool to drive any or all the GLBs in the device. This mechanism allows fast, efficient connections across the entire device.

Features

• SuperWIDE HIGH DENSITY IN-SYSTEM PROGRAMMABLE LOGIC

   — 3.3V Power Supply

   — User Selectable 3.3V/2.5V I/O

   — 12000 PLD Gates / 256 Macrocells

   — Up to 192 I/O Pins

   — 256 Registers

   — High-Speed Global Interconnect

   — SuperWIDE 32 Generic Logic Block GLB Size for Optimum Performance

   — SuperWIDE Input Gating 68 Inputs for Fast Counters, State Machines, Address Decoders, etc.

   — PCB Efficient Ball Grid Array BGA Package Options

   — Interfaces with Standard 5V TTL Devices

• HIGH PERFORMANCE E2CMOS® TECHNOLOGY

   — fmax = 125 MHz Maximum Operating Frequency

   — tpd = 7.5 ns Propagation Delay

   — Enhanced tsu2 = 7 ns, tsu3 CLK0/1 = 4.5ns, tsu3 CLK2/3 = 3.5ns

   — TTL/3.3V/2.5V Compatible Input Thresholds and Output Levels

   — Electrically Erasable and Reprogrammable

   — Non-Volatile

   — Programmable Speed/Power Logic Path Optimization

• IN-SYSTEM PROGRAMMABLE

   — Increased Manufacturing Yields, Reduced Time-to Market, and Improved Product Quality

   — Reprogram Soldered Devices for Faster Debugging

• 100% IEEE 1149.1 BOUNDARY SCAN TESTABLE AND 3.3V IN-SYSTEM PROGRAMMABLE

• ARCHITECTURE FEATURES

   — Enhanced Pin-Locking Architecture with Single Level Global Routing Pool and SuperWIDE GLBs

   — Wrap Around Product Term Sharing Array Supports up to 35 Product Terms Per Macrocell

   — Macrocells Support Concurrent Combinatorial and Registered Functions

   — Macrocell Registers Feature Multiple Control Options Including Set, Reset and Clock Enable

   — Four Dedicated Clock Input Pins Plus Macrocell Product Term Clocks

   — Slew and Skew Programmable I/O SASPI/O™ Supports Programmable Bus Hold, Pull-up, Open Drain and Slew and Skew Rate Options

   — Six Global Output Enable Terms, Two Global OE Pins and One Product Term OE per Macrocell

• ispDesignEXPERT™ – LOGIC COMPILER AND COMPLETE ISP DEVICE DESIGN SYSTEMS FROM HDL SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING

   — Superior Quality of Results

   — Tightly Integrated with Leading CAE Vendor Tools

   — Productivity Enhancing Timing Analyzer, Explore Tools, Timing Simulator and ispANALYZER™

   — PC and UNIX Platforms