ADF7030-1BSTZN-RL

RF Transceiver FSK 3.3V 48Pin LQFP T/R

The is a high performance, sub GHz radio transceiver in 48 pin LQFP package. It is a fully integrated, radio transceiver achieving high performance at very low power. The ADF7030-1 is ideally suited for applications that require long range, network robustness and long battery life. It is suitable for applications operate in ISM, SRD and licensed frequency bands at 169.4MHz to 169.6MHz, 426MHz to 470MHz and 863MHz to 960MHz. It provides extensive support for standards-based protocols like IEEE802.15.4g while also providing flexibility to support a wide range of proprietary protocols. The highly configurable low intermediate frequency IF receiver supports a large range of receiver channel bandwidths from 2.6KHz to 738KHz. The ADF7030-1 features two independent PAs supporting output power ranges of -20dBm to +13dBm and -20dBm to +17dBm. It features an on-chip ARM Cortex-M0 processor that performs radio control, radio calibration and packet management.

.

Forward error correction FEC and interleaving

.

Data rates of 0.1Kbps to 300Kbps 2FSK/2GFSK and 1Kbps to 360Kbps 4FSK/4GFSK transmit only

.

Dual power amplifiers PAs

.

Supply voltage of 2.2V to 3.6V VBATx pin voltage, transmit power

.

Receiver Rx performance up to 102dB blocking at ±20MHz offset

.

Transmitter Tx performance -20dBm to +17dBm range with 0.1dB step resolution

.

Low active current of 50mA Tx current at 17dBm and 21.2mA Rx current at 12.5Kbps

.

IEEE802.15.4g support

.

ETSI EN 300 220-1, EN 54-25, EN 13757-4, FCC and ARIB standards

.

Operating temperature range from -40°C to +85°C

ESD sensitive device. Proper ESD precautions should be taken to avoid performance degradation and loss of functionality.