OP Amp Single Current Fdbk ±6V/12V 8Pin SOIC N T/R
Product Details
The AD8011 is a very low power, high speed amplifier designed to operate on +5 V or ±5 V supplies. With wide bandwidth, low distortion and low power, this device is ideal as a general purpose amplifier. It also can be used to replace high speed amplifiers consuming more power. The AD8011 is a current feed-back amplifier and features gain flatness of 0.1 dB to 25 MHz while offering differential gain and phase error of 0.02% and 0.06° on a single 5 V supply. This makes the AD8011 ideal for professional video electronics such as cameras, video switchers or any high speed portable equipment. Additionally, the AD8011"s low distortion and fast settling make it ideal for buffering high speed 8-, 10-, 12-bit A-to-D converters.
The AD8011 offers very low power of 1 mA max and can run on single 5 V to 12 V supplies. All this is offered in a small 8-pin PDIP or 8-pin SOIC package. These features fit well with portable and battery powered applications where size and power are critical.
The AD8011 is available in the industrial temperature range of -40°C to +85°C.
An evaluation board is available for this product and may be ordered using the following product number: AD8011-EB. Schematic and layout for this evaluation board is contained in the product datasheet.
### Features and Benefits
Low Power
1 mA Power Supply Current 5 mW on 5 Vs
300 MHz, -3 dB Bandwidth G = +1
180 MHz, -3 dB Bandwidth G = +2
2000 V/µs Slew Rate
29 ns Settling Time to 0.1%
Fully Specified for 5 V Supply
RL = 1 kΩ, G = +2
Gain Flatness 0.1 dB to 25 MHz
0.02% Differential Gain Error
0.06° Differential Phase Error
-70 dBc Worst Harmonic @ 5 MHz
-62 dBc Worst Harmonic @ 20 MHz