用于 CDMA 和 WCDMA 的 50MHz 至 4GHz 40dB 对数功率检测器 6-DSBGA -40 to 85
The LMH2100 is a 40-dB RF power detector intended for use in CDMA and WCDMA applications. The device has an RF frequency range from 50 MHz to 4 GHz. It provides an accurate temperature and supply compensated output voltage that relates linearly to the RF input power in dBm. The circuit operates with a single supply from 2.7 V to 3.3 V.
The LMH2100 has an RF power detection range from −45 dBm to −5 dBm, and is ideally suited for direct use in combination with a 30-dB directional coupler. Additional low-pass filtering of the output signal can be realized by means of an external resistor and capacitor. shows a detector with an additional output low pass filter. The filter frequency is set with RS and CS.
shows a detector with an additional feedback low pass filter. Resistor RP is optional and will lower the Trans impedance gain RTRANS. The filter frequency is set with CP//CTRANS and RP//RTRANS.
The device is active for Enable = High; otherwise it is in a low power-consumption shutdown mode. To save power and prevent discharge of an external filter capacitance, the output OUT is high-impedance during shutdown.
型号 | 品牌 | 下载 |
---|---|---|
LMH2100TM/NOPB | TI 德州仪器 | 下载 |
LMH2191TMX/NOPB | TI 德州仪器 | 下载 |
LMH2180TM/NOPB | TI 德州仪器 | 下载 |
LMH2190TM-38/NOPB | TI 德州仪器 | 下载 |
LMH2191TME/NOPB | TI 德州仪器 | 下载 |
LMH2180YD/NOPB | TI 德州仪器 | 下载 |
LMH2180SDE/NOPB | TI 德州仪器 | 下载 |
LMH2180SD/NOPB | TI 德州仪器 | 下载 |
LMH2190TMX-38/NOPB | TI 德州仪器 | 下载 |
LMH2180SDX/NOPB | TI 德州仪器 | 下载 |
LMH2180YDX/NOPB | TI 德州仪器 | 下载 |