TPS2391

简单 -48V 热插拔控制器

The TPS2390 and integrated circuits are hot swap power managers optimized for use in nominal –48-V systems. They are designed for supply voltage ranges up to –80 V, and are rated to withstand spikes to –100 V. In conjunction with an external N-channel FET and sense resistor, they can be used to enable live insertion of plug-in cards and modules in powered systems. Both devices provide load current slew rate and peak magnitude limiting, easily programmed by sense resistor value and a single-external capacitor. They also provide single-line fault reporting, electrical isolation of faulty cards, and protection against nuisance overcurrent trips. The TPS2390 latches off in response to current faults, while the TPS2391 periodically retries the load in the event of a fault.

.

Wide Input Supply Range: –36 V to –80 V

.

Transient Rating to –100 V

.

Programmable Current Limit

.

Programmable Current Slew Rate

.

Enable Input EN

.

Fault Timer to Eliminate Nuisance Trips

.

Open-Drain Fault Output FAULT\

.

Requires Few External Components

.

8-Pin MSOP Package

.

APPLICA ONS

.

–48-V Distributed Power Systems

.

Central Office Switching

.

Wireless Base Station