ANALOG DEVICES AD80066KRSZ 数模转换器, 16 bit, 4.5V 至 5.25V, SSOP, 28 引脚
The is a complete 16-bit analog signal processor for imaging applications. It features a 4-channel architecture designed to sample and condition the outputs of linear charged coupled device CCD or contact image sensor CIS arrays. Each channel consists of an input clamp, correlated double sampler CDS, offset digital-to-analog converter DAC and programmable gain amplifier PGA, multiplexed to a high performance 16-bit ADC. The CDS amplifiers can be disabled for use with sensors that do not require CDS, such as CIS and CMOS sensors. The 16-bit digital output is multiplexed into an 8-bit output word, which is accessed using two read cycles. There is an optional single-byte output mode. The internal registers are programmed through a 3-wire serial interface and enable adjustment of the gain, offset and operating mode.