ADIS16362/PCBZ

六自由度惯性传感器 Six Degrees of Freedom Inertial Sensor

The S16362/PCB is a "breakout board" which provides ADIS16362BMLZ and interface PCB to simplify the process of "prototyping" during the early stages of system design and evaluation. The ADIS16362BMLZ is a fully calibrated, MEMS IMU, which provides a serial peripheral interface SPI for all digital communications. It provides a dual row, 24 pin connector interface that minimizes board space but does not support standard ribbon cable connections. The interface PCB provides access to the ADIS16362BMLZ, using dual row, 12 pin connectors, which supports standard ribbon cable systems and hand soldering connection techniques. The ADIS16362 provides a simple, cost effective method for integrating accurate, multiaxis, inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time.

.

It provides triaxis digital gyroscope with digital range scaling

.

It has triaxis digital accelerometer of ±1.7g

.

It supports wide sensor bandwidth of 330Hz

.

Supports autonomous operation and data collection

.

Factory calibrated sensitivity, bias, and axial alignment

.

It provides SPI compatible serial interface

.

It has embedded temperature sensor

.

It supports programmable operation and control

.

2000g shock survivability