SN74HC126DBR

具有三态输出翻两番总线缓冲器GATES QUADRUPLE BUS BUFFER GATES WITH 3-STATE OUTPUTS

These quadruple bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable OE input is low.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pullup resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

得捷:
IC BUFFER NON-INVERT 6V 14SSOP

立创商城:
SN74HC126DBR

德州仪器TI:
4-ch, 2-V to 6-V buffers with 3-state outputs

艾睿:
By driving the input to the transmission line this SN74HC126DBR buffer and line driver by Texas Instruments will amplify any signal. With a 3-state output, this is power management at its best. This line driver has an operating temperature range of -40 °C to 85 °C. This component will be shipped in tape and reel packaging for effective mounting and safe delivery. It has 4 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 2 V, while its maximum is 6 V.

安富利:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SSOP T/R

Chip1Stop:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SSOP T/R

Verical:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SSOP T/R

Newark:
# TEXAS INSTRUMENTS  SN74HC126DBR  Buffer, 74HC126, 2 V to 6 V, SSOP-14

Win Source:
IC BUS BUFF TRI-ST QD 14SSOP