TDF8591TH/N1TJ

TDF8591TH - 2 x 100W SE 4Ω or 1 x 310W BTL 4Ω class-D amplifier SOIC 24Pin

Overview

The TDF8591TH is a high-efficiency class-D audio power amplifier with low power dissipation for application in car audio systems. The typical output power is 2 x 100 W into 4 Ω.

The TDF8591TH is available in an HSOP24 power package with a small internal heat sink. Depending on the supply voltage and load conditions, a small or even no external heat sink is required. The amplifier operates over a wide supply voltage range from +-14 V to +-29 V and consumes a low quiescent current.

MoreLess

## Features

* Zero dead time switching

* Advanced output current protection

* No DC offset induced pop noise at mode transitions

* High efficiency

* Supply voltage from +-14 V to +-29 V

* Low quiescent current

* Usable as a stereo Single-Ended SE amplifier or as a mono amplifier in Bridge-Tied Load BTL

* Fixed gain of 26 dB in SE and 32 dB in BTL

* High BTL output power: 310 W into 4 Ω

* Suitable for speakers in the 2 Ω to 8 Ω range

* High supply voltage ripple rejection

* Internal oscillator or synchronized to an external clock

* Full short-circuit proof outputs across load and to supply lines

* Thermal foldback and thermal protection

* AEC-Q100 qualified

## Features