MAX196BENI

多量程，单％V ，12位DAS，带有12位总线接口 Multirange, Single %V, 12-Bit DAS with 12-Bit Bus Interface

12 位模数转换器 6 输入 1 SAR 28-PDIP

得捷:
IC ADC 12BIT SAR 28DIP

安富利:
The MAX196/MAX198 multirange, 12-bit data-acquisition systems DAS require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V MAX196 and ±4V MAX198. These systems provide six analog input channels that are independently software programmable for a variety of ranges: ±10V, ±5V, 0V to +10V, and 0V to +5V for the MAX196; ±VREF, ±VREF/2, 0V to +VREF, and 0V to +VREF/2 for the MAX198. This range switching increases the effective dynamic range to 14 bits and provides the flexibility to interface ±12V, ±15V, and 4mA to 20mA powered sensors to a single +5V system. In addition, these converters are fault protected to ±16.5V; a fault condition on any channel will not affect the conversion result of the selected channel. Other features include a 5MHz bandwidth track/hold, 100ksps throughput rate, software-selectable internal/external clock, internal/external acquisition control, 12-bit parallel interface, and internal 4.096V or external reference.Two programmable power-down modes STBYPD, FULLPD provide low-current shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays.The MAX196/MAX198 employ a standard microprocessor µP interface. A three-state data I/O port is configured to operate with 16-bit data buses, and data-access and bus-release timing specifications are compatible with most popular µPs. All logic inputs and outputs are TTL/CMOS compatible.