LM810M3-4.63

TEXAS INSTRUMENTS  LM810M3-4.63  精准监视器, 3V, 3.3V, 和5V电源电压, 高电平有效复位, 1.2V-5.5V输入, SOT-23-3

The is a 3-pin Microprocessor Supervisory Circuit with active-high RESET output. The supervisory circuit can be used to monitor the power supplies in microprocessor and digital systems. It provides a reset to the microprocessor during power-up, power-down and brownout conditions. The function of the LM809 is to monitor the VCC supply voltage and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold.

.

Power supply transient immunity

.

Fully specified over-temperature

.

Ensured RESET output valid for VCC >= 1V

.

Superior upgrade to MAX809 and MAX810

.

140ms Minimum power-ON reset pulse width

.

15µA Typical low supply current