URHR-3

TE CONNECTIVITY / RAYCHEM  URHR- 3  热缩环, 37MM, 黑色

**Cable Clamp Heat Shrink Grommets**

ShrinkHoop™ grommet URHR is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the center of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.