2,5 MSF 09

Minimodul Vertical Locking HeadersThese Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings 3114 Series, see stock number 737-8482 typical, for indirect mating of wire to board connections.### 2.5mm 线到板 - Lumberg Minimodul 系列这些 Lumberg Minimodul 连接器适合电缆到板连接。 Minimodul 系列连接器可使用成熟的压接技术轻松实现单导线和扁平电缆捆束，特别适合小批或中等批量生产。 Minimodul 系列连接器适合电流高达 5A 的信号和低负载。 节距 2.50 mm .098"。

Minimodul Vertical Locking Headers

这些 Minimodul™ 垂直引脚针座与压接触点外壳（3114 系列）配用，请参见库存号 737-8482 典型，用于间接匹配的线到板连接。

欧时:
Lumberg PCB 针座 Minimodul 系列 9路 2.5mm节距 1排 直向 2,5 MSF 09, 焊接端接, 5A, 通孔

艾睿:
Use this shrouded 2,5 MSF 09 header connector from Lumberg where IDC ribbon cables are used. This HDR connector&s;s 9 contacts that are made out of brass and plated with tin over nickel. It has a maximum voltage rating of 160 VAC. This is a 1-row connector. It has a header type gender. Its pitch is 5 mm. It has a straight body orientation. This device has a maximum current rating of 5 A. This product comes packaged in bulk, so the parts will be stored loosely. It uses the solder termination method. This connector has an operating temperature of -40 to 120 °C. 2,5 MSF 09 is housed in polyamide. This product is 27.2 mm long, 22.5 mm tall and 7.5 mm deep.

Verical:
Conn Shrouded Header HDR 9 POS 5mm Solder ST Thru-Hole Bulk