LC75813TS-E

Segment Display LCD Driver 3.3V/5V 100Pin PQFP Tray

The LC75813T is the 1/3 duty and 1/4 duty general-purpose LCD driver that can be used for frequency display in electronic tuners under the control of a microcontroller. The LC75813T can drive an LCD with up to 344 segments directly. The LC75813T can also control up to 8 general-purpose output ports. Since the LC75813T use separate power supply systems for the LCD drive block and the logic block, the LCD driver block power-supply voltage can be set to any voltage in the range 2.7 to 6.0 volts, regardless of the logic block power-supply voltage.

Features

---

 |

.

Switching between 1/3 duty and 1/4 duty drive techniques under serial data control.

.

Switching between 1/2 bias and 1/3 bias drive techniques under serial data control.

.

Up to 261 segments for 1/3 duty drive and 344 segments for 1/4 duty drive can be displayed.

.

Serial data input supports CCB format communication with the system controller.

.

Serial data control of the power-saving mode based backup function and all the segments forced off function.

.

Serial data control of switching between the segment output port and the general-purpose output port functions.

.

Serial data control of frame frequency for common and segment output waveforms.

.

High generality, since display data is displayed directly without decoder intervention.

.

Independent VLCD for the LCD driver block

VLCD can be set to any voltage in the range 2.7 to 6.0 volts, regardless of the logic block power-supply voltage.

.

The INH pin can force the display to the off state.

.

RC oscillator circuit