74AVC1T45GW

NXP  74AVC1T45GW  收发器, 转换, 800mV至3.6V, SOT-363-6

The is a single-bit dual supply Voltage Level Translator/Transceiver with 3-state output that enables bidirectional level translation. It features two 1-bit input-output ports, a direction control input and dual supply pins. Both VCCA and VCCB can be supplied at any voltage between 0.8 and 3.6V making the device suitable for translating between any of the low voltage nodes. Pins A and DIR are referenced to VCCA and pin B is referenced to VCCB. A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCCA or VCCB are at GND level, both A and B are in the high-impedance OFF-state.

.

High noise immunity

.

Suspend mode

.

IOFF circuitry provides partial power-down mode operation

.

Complies with JEDEC standards

.

Latch-up performance exceeds 100mA per JESD 78 class II

.

Inputs accept voltages up to 3.6V

.

Low noise overshoot and undershoot <10% of VCC