稳压 3.3V 高功率充电泵 DC/DC 转换器
The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage two alkaline, NiCd, or NiMH batteries. They can deliver an output current of at least 200 mA 100 mA for the TPS60122 and TPS60123, all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. , TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package PWP.
PowerPAD is a trademark of Texas Instruments Incorporated.
型号 | 品牌 | 下载 |
---|---|---|
TPS60121 | TI 德州仪器 | 下载 |
TPS62204DBV | TI 德州仪器 | 下载 |
TPS62202DBV | TI 德州仪器 | 下载 |
TPS62207DBV | TI 德州仪器 | 下载 |
TPS62205DBV | TI 德州仪器 | 下载 |
TPS62120DCN | TI 德州仪器 | 下载 |
TPS62162DSG | TI 德州仪器 | 下载 |
TPS62203DBV | TI 德州仪器 | 下载 |
TPS62200DBV | TI 德州仪器 | 下载 |
TPS62201DBV | TI 德州仪器 | 下载 |
TPS65051EVM-195 | TI 德州仪器 | 下载 |