A30H2408SSLP

Metallic Enclosure 30inch Height x 24inch Width x 8inch Depth - GR0735370

**Applications:**

For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure"s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants.

**Specifications:**

* 14-Gauge Type 304 or 316L Stainless Steel Bodies and Doors

* Seams Continuously Welded and Ground Smooth

* Seamless Foam-in-Place Gasket

* Rolled Lip Around Three Sides of Door

* Stainless Steel Door Clamp Assembly

* Hasp and Staple for Padlocking

* Door Removed by Pulling Stainless Steel Continuous Hinge Pin

* Data Pocket is High-Impact Thermoplastic

* Collar Studs Provided for Mounting Optional Panels

* Exterior Hardware on Type 316L Stainless Steel Enclosures Matches Enclosure Material

* Bonding Provision on Door; Grounding Stud on Body

**Finish:**

Door, sides, top and bottomr have smooth #4 brushed finish.

**Industry Standards:**

* UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997

* cUL Listed per CSA C22.2 No. 94; Type 3R, 4, 4X, 12; File No. E61997

* NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13

* CSA File No. 42186; Type 4, 4X, 12

* IEC 60529, IP66

* Meets NEMA Type 3RX Requirements