RN-42-SM

Bluetooth Class II 3Mbps 30Pin Bag

The RN42 is a small form factor, low power, multi-interface protocol, Class 2 Bluetooth radio that is simple to design in, and is fully certified for designers who want to add a complete embedded Bluetooth solution to their products fast. The RN42 delivers up to 3 Mbps data rate for distances up to 20 meters with its high-performance PCB trace antenna and support for Bluetooth EDR. The RN42 is also available without antenna RN42N for applications that require an external antenna. The RN42N is form, function, and pin compatible with the RN42. Other configurations include: Apple-compatible firmware RN42APL-I/RM, HCI mode RN42HCI-I/RM, HID mode RN42HID-I/RM, USB mode RN42U-I/RM, and socket module RN42SM-I/RM.

.

RF Module on a socket pin break out module RN42SM-I/RM

.

Fully certified Class 2 Bluetooth 2.1 + EDR module

.

Onboard embedded Bluetooth stack no host processor required

.

UART SPP or HCI and USB HCI only data connection hardware interfaces

.

Supports Bluetooth data link to iPhone/iPad/iPod Touch

.

Supports HID profile for making accessories such as keyboards, mouse, pointing devices

.

Programmable low power modes

.

Secure communications, 128 bit encryption

.

Error correction for guaranteed packet delivery

.

UART local and over-the-air RF configuration

.

Auto-discovery/pairing requires no software configuration instant cable replacement

.

Castellated SMT pads for easy and reliable PCB mounting

.

The standard part number RN42-I/RM supports SPP and DUN profiles

.

Bluetooth SIG qualified