EVAL-ADXL363Z-MLP

ANALOG DEVICES EVAL-ADXL363Z-MLP Low Power Real Time Evaluation System for Micropower Three Sensor Combination IC

The is a low power real time evaluation system for ADXL363 device. The ADXL363 is an ultralow power, three sensor combination consisting of a three axis MEMS accelerometer, a temperature sensor and an ADC input for synchronous conversion of an external signal. The entire system consumes less than 2µA at a 100Hz output data rate and 270nA when in motion triggered wake up mode. The ADXL363 communicates via a serial port interface SPI and always provides 12bit output resolution for all three sensors. The ADXL363 accelerometer provides selectable measurement ranges of ±2g, ±4g and ±8g with a resolution of 1mg/LSB on the ±2g range. The ADXL363 temperature sensor operates with a scale factor of 0.065°C typical. In addition to the accelerometer and temperature sensor, the ADXL363 also provides access to an internal ADC for synchronous conversion of an additional analog input.

.

All sensors sampled synchronously

.

Up to 400Hz output data rate ODR

.

Samples can be synchronized to external trigger

.

Ultralow power

.

10nA standby current

.

Built in features for motion based system level power savings

.

Wide supply and I/O voltage ranges from 1.6V to 3.5V

.

SPI digital interface

.

Adjustable threshold sleep/wake modes for motion activation

.

Power can be derived from coin cell battery

ESD sensitive device, take proper precaution while handling the device.