AD9241ASZRL

模数转换器 - ADC Complete 14B 1.25 MSPS Mono

Product Details

The AD9241 is a 1.25 MSPS, single supply, 14-bit analog-to- digital converter ADC. It combines a low cost, high speed CMOS process and a novel architecture to achieve the resolution and speed of existing hybrid implementations at a fraction of the power consumption and cost. It is a complete, monolithic ADC with an on-chip, high performance, low noise sample-and-hold amplifier and programmable voltage reference. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. The device uses a multistage differential pipelined architecture with digital output error correction logic to guarantee no missing codes over the full operating temperature range.

The input of the AD9241 is highly flexible, allowing for easy interfacing to imaging, communications, medical, and data-acquisition systems. A truly differential input structure allows for both single-ended and differential input interfaces of varying input spans. The sample-and-hold amplifier SHA is equally suited for both multiplexed systems that switch full-scale voltage levels in successive channels as well as sampling single-channel inputs at frequencies up to and beyond the Nyquist rate. Also, the AD9241 performs well in communication systems employing Direct-IF Down Conversion since the SHA in the differential input mode can achieve excellent dynamic performance well beyond its specified Nyquist frequency of 0.625 MHz.

A single clock input is used to control all internal conversion cycles. The digital output data is presented in straight binary output format. An out-of-range OTR signal indicates an overflow condition which can be used with the most significant bit to determine low or high overflow.

### Features and Benefits

.

Low Power Dissipation: 60 mW

.

Single +5 V Supply

.

Integral Nonlinearity Error: 2.5 LSB

.

Differential Nonlinearity Error: 0.6 LSB

.

Input Referred Noise: 0.36 LSB

.

On-Chip Sample-and-Hold Amplifier and Voltage Reference

.

Signal-to-Noise and Distortion

Ratio: 78.0 dB

.

Spurious-Free Dynamic

Range: 88.0 dB

.

Out-of-Range Indicator

.

Straight Binary Output Data

.

44-Pin MQFP