NKK SWITCHES JB15KP-2C 轻触开关, 0.05A, 24VDC, 焊接
Series JB illuminated low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.
艾睿:
Want to use a force of pressure to turn on your circuit? Check out this low profile JB15KP-2C tactile switch from NKK Switches. This device has a maximum current rating of 0.125 A @ 24VDC. It has a SPST configuration. This tactile switch has an operating temperature range of -25 °C to 70 °C. The JB15KP-2C tactile switch has a PC pin termination style. This product is 12 mm long, 11.2 mm tall and 12 mm deep. This red square button actuator is 7 mm long. The maximum DC voltage rating is 24 VDC.
Allied Electronics:
SWITCH TACTILE SPST-NO 0.05A 24V
Chip1Stop:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 5000000Cycles 1.76N Thru-Hole
Verical:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 5000000Cycles 1.76N Thru-Hole
Newark:
# NKK SWITCHES JB15KP-2C Tactile Switch, Non Illuminated, 24 V, 50 mA, 1.76 N, Solder