JB15HAP-2B

NKK SWITCHES  JB15HAP-2B  轻触开关, 0.125A, 24VDC, 焊接

Series JB illuminated low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.

得捷:
SWITCH TACT SPST-NO 0.125A 24V

立创商城:
JB15HAP-2B

e络盟:
轻触开关, 0.125A, 24VDC, 焊接

艾睿:
This low profile JB15HAP-2B tactile switch from NKK Switches is perfect for turning on your circuit by applying pressure. This device has a maximum current rating of 0.125 A @ 24VDC. It has a SPST configuration. This tactile switch has a minimum operating temperature of -25 °C and a maximum of 70 °C. The JB15HAP-2B tactile switch has a PC pin termination style. This white square button actuator is 1 mm long. This product is 12.3 mm long, 14.7 mm tall and 11.8 mm deep. The maximum DC voltage rating is 24 VDC.

Allied Electronics:
Switch; Sealed; Tactile; SPST; OFF-ON; Non-Illum; Flat Wht Cap; 0.125A; 24VDC; Str PC

Chip1Stop:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 1000000Cycles 2.65N Thru-Hole

Verical:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 1000000Cycles 2.65N Thru-Hole

Newark:
# NKK SWITCHES  JB15HAP-2B  Tactile Switch, Non Illuminated, 24 V, 125 mA, 2.65 N, Solder