NXP 74HC173D,652 触发器, 三态非反相, 正沿, D, 88 MHz, SOIC, 16 引脚
The 74HC173D is a quad positive-edge trigger D-type Flip-flop with 3-state outputs. This high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL LSTTL. This 4-bit parallel load register with clock enable control, 3-state buffered outputs Q0 to Q3 and master reset MR. When the two data enable inputs E1\ and E2\\ are low, the data on the Dn inputs is loaded into the register synchronously with the low-to-high clock transition. When one or both En\ inputs are high one set-up time prior to the low-to-high clock transition, the register will retain the previous data. Data inputs and clock enable inputs are fully edge-triggered and must be stable only one set-up time prior to the low-to-high clock transition. The master reset input MR is an active high asynchronous input. When MR is high, all four flip-flops are reset cleared independently of any other input condition.