双路,宽带,与Active脱机控制高输出电流运算放大器 Dual, Wideband, High Output Current Operational Amplifier with Active Off-Line Control
The provides the high output current and low distortion required in emerging Power Line Modem driver applications. Operating on a single +12V supply, the OPA2673 consumes a low 16mA/ch quiescent current to deliver a very high 700mA output current. This output current supports even the most demanding Power Line Modem requirements with greater than 460mA minimum output current +25°C minimum value with low harmonic distortion.
Power control features are included to allow system power consumption to be minimized. Two logic control lines allow four quiescent power settings: full power, 75% bias power in applications that are less demanding, 50% bias power cutback for short loops, and offline with active offline control to present a high impedance even with large signals present at the output pin.
Specified on ±6V supplies to support +12V operation, the OPA2673 also supports up to +13V single or ±6.5V dual supplies. Video applications benefit from a very high output current to drive up to 10 parallel video loads 15 with < 0.1%/0.1° dG/d nonlinearity.
340MHz G = +4V/V
All other trademarks are the property of their respective owners
型号 | 品牌 | 下载 |
---|---|---|
OPA2673 | TI 德州仪器 | 下载 |
OPA211 | TI 德州仪器 | 下载 |
OPA2335AIDR | TI 德州仪器 | 下载 |
OPA2369AIDCNTG4 | TI 德州仪器 | 下载 |
OPA2335AIDRG4 | TI 德州仪器 | 下载 |
OPA2349UAG4 | TI 德州仪器 | 下载 |
OPA2333AIDR | TI 德州仪器 | 下载 |
OPA2340EA/250G4 | TI 德州仪器 | 下载 |
OPA2335AIDGKT | TI 德州仪器 | 下载 |
OPA2336P | TI 德州仪器 | 下载 |
OPA2340UA/2K5 | TI 德州仪器 | 下载 |