SC28L92A1B,557

NXP  SC28L92A1B,557  接口, UART, 2通道, 1 Mbps, 2.97 V, 3.63 V, QFP, 44 引脚

The is a Dual Universal Asynchronous Receiver/Transmitter DUART is a single-chip CMOS-LSI communications device that provides two full-duplex asynchronous receiver/transmitter channels. It interfaces directly with microprocessors and may be used in a polled or interrupt driven system with modem and DMA interface. The operating mode and data format of each channel can be programmed independently. Additionally, each receiver and transmitter can select its operating speed as one of 28 fixed baud rates; a 16x clock derived from a programmable counter/timer or an external 1x or 16x clock. The baud rate generator and counter/timer can operate directly from a crystal or from external clock inputs. The ability to independently program the operating speed of the receiver and transmitter make the DUART particularly attractive for dual-speed channel applications such as clustered terminal systems.

.

16-bit Programmable counter/timer

.

Parity, framing and overrun error detection

.

False start bit detection

.

Line break detection and generation

.

Multi-function 7-bit input port

.

Multi-function 8-bit output port

.

Single interrupt output with eight maskable interrupting conditions

.

Each FIFO can be programmed for four different interrupt levels

.

Watchdog timer for each receiver

.

Automatic wake-up mode for multidrop applications

.

Start-end break interrupt/status

.

Detects break which originates in the middle of a character

.

On-chip crystal oscillator

.

Power-down mode

.

Receiver timeout mode