IHD1EB471L

470uH +/-15% Ferrite Leaded Inductor, Max SRF:1kHz, 490mA Idc, 1.03Ω Rdc IHD

**Electrical Specifications.** **Inductance:** Measured at 1 V with no DC current. **Incremental Current:** The typical current at which the inductance will be decreased by 5% from its initial zero DC value. **Dielectric Rating:** 2500 VRMS between winding and outer circumference to within 0.250" 6.35 mm of the insulating sleeve edge. **Operating Temperature:** –55°C to +125°C no load. –55°C to +85°C at full rated current. **Current Rating:** Maximum continuous. Operating current DC or RMS based on a 40°C temperature rise. **Tolerance: **15%.

**Mechanical Specifications.** **Wire:** Solid soft copper. **Terminals:** 20 AWG tinned copper leads. **Coating:** Polyolefin tubing — flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. **Core Material:** Ferrite.

* Printed Circuit Mounting

* Protected By Polyolefin Tubing

* High Saturation Bobbin Used Allowing High Inductance with Low DC Resistance

* Pre-Tinned Leads

* High Resistivity Core Offers Very High Parallel Resistance, Resulting in Maximum Coil Performance

* 20 Sleeveless Models Available at Reduced Cost