B43545A9687M000

Electrolytic Capacitor, Snap-in, B43545 Series, 680F, 20%, 400V, 35mm, 0.09Ω

The B43545 series long life grade Aluminium Electrolytic Capacitor encapsulated in an aluminium case fully insulated with PVC. It has snap-in solder pins to hold component in place on PC-board, overload protection by safety vent on the case wall and minus pole marking on case surface, it is not insulated from case. It features high reliability, outstanding ripple current capability, extremely improved performance at high frequencies and very high CV. It is used in frequency converters, solar inverters, uninterruptible power supplies and professional power supplies. The version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB.

.

Charge-discharge proof, polar

.

Version with PET insulation available

.

Base cooling available for case sizes 30 x 35mm to 35 x 55mm

.

Optimized internal thermal resistance

.

Outstanding low ESR at operating conditions above 50°C

.

Different case sizes available for each capacitance value

.

Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5

.

400 to 450VDC Rated voltage range

.

82 to 820µF Rated capacitance range