LPC2292FBD144/01

NXP  LPC2292FBD144/01  微控制器, 32位, ARM7TDMI, 60 MHz, 256 KB, 16 KB, 144 引脚, LQFP

The is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 256kB embedded high speed flash, 16kB on-chip SRAM, 8-channel 10-bit A/D converter, three 32-bit timers, PWM channels and 112 general-purpose I/O pins.

.

In-system programming ISP and In-application programming IAP

.

EmbeddedICE RT and embedded trace interfaces

.

Serial interfaces - two UARTs 16C550, fast I2C-bus 400 Kbit/s and two SPIs

.

Two 32-bit timers, PWM unit, real-time clock and watchdog

.

Vectored interrupt controller with configurable priorities and vector addresses

.

Configurable external memory interface w/up to 4 banks, each up to 16MB and 8/16/32-bit data width

.

Up to 112 general purpose I/O pins 5V tolerant

.

Up to nine edge or level sensitive external interrupt pins available

.

60MHz Maximum CPU clock available from programmable on-chip PLL

.

On-chip crystal oscillator with an operating range of 1MHz to 25MHz

.

Power saving modes include Idle and power-down

.

Processor wake-up from power-down mode via external interrupt

.

Individual enable/disable of peripheral functions for power optimization