DM330017

MICROCHIP  DM330017  入门开发套件, MPLAB, DSPIC33F, 直流/直流

is a MPLAB starter kit for digital power allows the user to easily explore the capabilities and features of the dsPIC33F GS digital power conversion family. It is a digitally controlled power supply board that consists of one independent DC/DC synchronous Buck converter and one independent DC/DC Boost converter. Each power stage includes a MOSFET controlled 5W resistive load. The kit provides closed loop proportional integral derivativePID control in the software to maintain the desired output voltage level. The dsPIC DSC device provides the necessary memory and peripherals for A/D conversion, PWM generation, analog comparison and general purpose I/O, preventing the need to perform these functions in external circuitry. SMPS dsPIC DSC devices are specifically designed to provide low cost and efficient control for a wide range of power supply topologies.

.

DsPIC33FJ09GS302 low cost 16bit digital power conversion DSC

.

One synchronous Buck converter power stage

.

One Boost converter power stage

.

LCD display for voltage, current, temperature and fault conditions

.

On board in circuit debugger /programmer via USB

.

On board programmable resistive loads

.

On board temperature sensor

.

Compact design 4inch x 2.5inch board

.

Powered via 9V power supply

The Digital Power Starter Kit is intended for evaluation and development purposes and should only be operated in a normal laboratory environment as defined by IEC 61010-1:2001.