V2-EVAL-US

BOARD, EVALUATION, US PSU; Silicon Manufacturer: FTDI; Silicon Core Number: FT42232H; Features: Embedded USB Host / S...

The is an evaluation kit designed to support easy evaluation of Vinculum-II VNC2 embedded USB host controller devices with US version mains adapter PSU. Vinculum-II VNC2 is 2nd generation of USB host/slave controllers and its features a powerful 16bit MCU core, with embedded 256KB Flash and 16KB RAM memory. This controller supports a range of flexible interfaces including UART, SPI, FIFO and PWM. The V2-Eval board includes all the necessary components required by a user to begin developing USB host/slave system applications based on the VNC2 device. This evaluation board has supply voltage range from 4.75V to 5.25V and supply current of 60mA. The V2-EVAL board features a set of 6 connectors providing access to GPIO capable pins on the VNC2 device. The V2-EVAL kit requires a VNC2 based daughterboard module to be installed into the V2-EVAL base board socket site, in order to enable development with the kit.

.

Embedded USB host/slave chip VNC2 accessible via daughterboard

.

Selection of VNC2 daughter boards to support 32 pin, 48 pin and 64 pin QFN packages

.

Two USB type A connectors for connecting to USB slave peripherals

.

VNC2 IO port connectors grouped by port name or function

.

FT42232H -USB to quad channel UART device for VNC2 programming and debug functions

.

One USB type B connector for connection to PC host via FT4232H

.

4 user programmable LEDs

.

4 user programmable push button switches

Without proper anti static handling the board can be damaged. Therefore, take anti static precautions while handling the board.

The V2-Eval board must be stored between -40°C and 80°C. The recommended operating temperature is between 0°C and 55°C.