UMFT602A

评估模块, 先进先出至USB 3.0 UVC 桥接, 32 Bit 先进先出总线, HSMC连接器

The from FTDI is an USB3.0 UVC class to 32bit FIFO bus evaluation/development module with HSMC connector. The module features HSMC connector for interfacing FTDI"s FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class UVC bridge IC with external hardware. The UMFT602A allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT602. As a daughter card, the UMFT602A must work with a FIFO master board which has a HSMC connector. It provides different FIFO bus interfaces with 32bit data width. The module is designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. The UMFT602A support 2 parallel slave FIFO bus protocols Multi-Channel FIFO / 245 Synchronous FIFO with a data "burst" rate of up to 400MB/s.

.

Supports USB 3.1 GEN 1 super speed 5Gbps/USB 2.0 high speed 480Mbps transfer

.

UVC 1.1, raw YUV422

.

Up to 4 video input channels, one I2C bus master interface for video source device configuration

.

Supports multi voltage I/O of 1.8V, 2.5V and 3.3V

.

High speed connector for FIFO bus

.

HSMC is compatible with most Altera FPGA reference design boards

.

Multi powered options external DC powered, BUS powered, HSMC powered

.

Hardware reset

.

Micro-USB3.0 receptacle